Detail Specifications
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
Between 1.5615 inches and 1.5620 inches
Pilot Diameter:
Between 0.9370 inches and 0.9375 inches
Overall Length:
3.0620 inches
Flange Diameter:
Between 1.7470 inches and 1.7500 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Diameter:
Between 1.6220 inches and 1.6280 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1870 inches single shaft and 0.1872 inches single shaft
Shaft Length:
0.3790 inches single shaft and 0.3870 inches single shaft
Schematic Diagram Designator:
1 y-rotor, 1 stator
Fragility Factor:
Moderately rugged
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
7.0 milliamperes
Stator Input Electrical Power Rating:
100.0 milliwatts
Frequency In Hertz:
400.0
Zso Impedance Magnitude In Ohms:
13000.00
Zso Impedance Angle In Deg:
88.00
Rotor Dc Resistance In Ohms:
420.00
Stator Dc Resistance In Ohms:
675.00
Phase Shift Angle In Deg:
3.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
30.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
45.00
Electrical Error Angular Range In Minutes:
-6.0/+6.0
Spline Tooth Quantity:
21 single shaft
Actuator Friction Torque At Plus 25 Deg Celsius:
0.10 inch-ounces
Alignment Hole Quantity:
4
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0008 inches
Shaft End Play:
0.0030 inches
Pilot Length:
0.0370 mils and 0.0430 centimeters
Shoulder Length:
0.1290 mils and 0.1350 centimeters
Mounting Surface To Terminal End Distance:
2.5230 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Maximum Runout:
0.0008 inches
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Class:
2a single shaft
Shaft Thread Length:
0.3550 inches single shaft
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
0.735 rotor to stator
Alignment Hole Bolt Circle Diameter:
1.2500 inches
Shaft Thread Size:
0.190 inches single shaft
Shaft Radial Play Determining Weight:
16.0 ounces
Shaft End Play Determining Weight:
16.0 ounces
Terminal Type And Quantity:
5 screw
Item Name:
Synchro,control Transformer
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
